2-7
Handling Paper | 2-7
5. To keep the paper wound when you’re not printing, use the roll paper
belt included with your printer.
6. See the next section to load the paper for printing.
Loading Roll Paper for Printing
Once the roll paper is attached to the spindle and inserted in the printer,
you’re ready to load it for printing. Follow these steps:
1. Make sure the printer is turned on. Then press the
Paper Source
button until one of the
Roll
lights comes on.
Caution
To avoid feeding excess
paper through the printer,
make sure you don’t
select Sheet when you’re
using roll paper.
To Next Page
Loading...
