2-3
Handling Paper | 2-3
Printing Tips for EPSON Media
Follow these tips for using and storing printing materials:
•
Avoid touching the printable surface of the paper or other media with
bare hands. Fingerprints may affect print quality. Handle media by the
edges or use cotton gloves.
•
Always choose the correct print mode setting in your print options
before you send your job.
•
Always select the correct paper source (roll or sheet) from the printer’s
control panel.
•
Keep unused media in its original packaging and store it in a cool, dry
place to avoid a decline in quality. Avoid storing media or printouts
where they will be exposed to high temperature, humidity, or direct
sunlight.
Using Roll Paper
You can use any roll paper with a 2-inch core, up to 24 inches wide. With
the optional 3-inch spindle, you can also use roll paper that has a 3-inch
core. Switching paper rolls is a simple process.
This section covers the following:
•
Attaching and removing paper from the spindle
•
Inserting the spindle in the printer
•
Loading the paper for printing
Attaching Paper to the Spindle
Follow these steps:
1. Open the roll paper cover and lift out the spindle.
2. Slide the movable paper stop (flange) off the left end of the spindle.
To Next Page
Loading...
