Epson Stylus Pro 7000 - A Configuring the Printer; Selecting the Printers Interface

A-2
A-2 | Configuring the Printer
Selecting the Printer’s Interface
The printer includes both a parallel and USB interface. You can also install
an optional interface board for networking or additional connectivity. By
default, the printer automatically switches to whichever interface is receiving
data.
You can use the control panel to select an individual interface for sending
data to the printer. Follow these steps:
1. Press the
SelecType
button.
PRINTER SETTING MENU
appears on
the display.
2. Press the
Item
button repeatedly until
INTERFACE=AUTO*
appears on
the display. This is the default setting.
•
Press the
+
button once to select the parallel interface.
INTERFACE=PARA./USB
appears on the display.
•
Continue pressing the
+
button to select the
OPTION
(optional)
interface.
You can use the
+
or
–
button to cycle through all three settings.
3. When you have selected the setting you want, press the
Enter
button to
save it.
4. Press the
SelecType
button to exit the Printer Setting menu.