8-4
8-48-4
8-4
8-4 | Specifications
Electrical
Check the label on the back of the printer for voltage information.
Initialization
Safety Approvals
120 V model 220/240 V model
Input voltage range 90 to 132 V 198 to 264 V
Rated frequency range 50 to 60 Hz 50 to 60 Hz
Input frequency range 49 to 61 Hz 49 to 61 Hz
Rated current 1.0 A 0.5 A
Power consumption Approx. 100 W (ISO 10561 letter pattern)
15W or less in standby mode
Hardware initialization at power on:
The printer mechanism is set to its initial state.
The input data buffer and print buffer are cleared.
The printer returns to the last default settings.
Software initialization when the ESC@ (initialize the printer)
command is received:
The print buffer is cleared.
The printer returns to the last default settings.
Panel button initialization by pressing the
Pause
button on the
control panel for 3 seconds or more:
The print head is capped.
Any paper in the printer is ejected.
The input data buffer and print buffer are cleared.
The printer returns to the last default settings.
Safety standards
Safety standardsSafety standards
Safety standards UL 1950, CSA 22.2 No. 950
EMC
EMCEMC
EMC FCC part 15 subpart B class B, CSA C108.8 class B
To Next Page
Loading...
