1
You can use the SelecType menus on the printer’s control panel to configure
printer settings (as well as check the printer and perform maintenance
operations.) The following table lists the menus, their functions, and where
to find additional information:
This chapter describes the following configuration settings:
•
Selecting the printer’s interface
•
Configuring the parallel interface
•
Changing the printer’s code page setting
•
Setting the control panel language
•
Restoring default settings
SelecType menus
Menu Description
For more
information,
see page
Printer Setting Configure the printer 2-12, 2-18
Test Print Print a nozzle check or status check 6-1, 5-4
Printer Status Check ink levels and component life 5-3
Paper
Configuration
Register paper thickness and drying time,
and select registered configurations
2-21
Cutter
Replacement
Replace the paper cutter blade 6-9
Head Alignment Align the print head 6-5
Appendix A:
Configuring
the Printer
To Next Page
Loading...
