2-4
2-4 | Handling Paper
3. Position the roll so the paper unwinds as shown:
4. Slide the roll onto the spindle so it fits securely over the paper stop.
5. Slide the movable paper stop back onto the spindle and insert it firmly
into the end of the roll.
Removing Paper from the Spindle
When you need to change paper, follow these steps to remove the paper roll
from the spindle:
1. Open the roll paper cover and lift out the roll and spindle.
If the paper is loaded for printing, first lower the paper set lever and roll
up the paper before you remove the spindle.
2. Lay the roll down on a flat surface.
3. Loosen the movable paper stop by tapping it with your hand.
4. Slide the paper stop off the end of the spindle.
5. Remove the roll from the spindle.
6. Attach the new paper roll to the spindle.
paper stop
Caution
To avoid damage, do not
tap the end of the spindle
on the floor.
Note
Store unused roll paper in
its original package—
including the bag, end
caps, and box—to protect
the paper.
To Next Page
Loading...
