100
Note:
Selecting 1CUT will not make excess paper, but the cutting position
and image border may be misaligned depending on the accuracy.
On the other hand, selecting 2CUTS will not cut the next print job,
but the paper feed length may be shortened by 1mm because the paper
will be cut shorter.
4. Start printing.
Roll Paper Option
Note:
When Sheet is selected from the Paper Source list, the Roll Paper Settings
(Auto Rotate, Paper Width, Auto Cut, and Print Page Line) are not
available.
Auto Rotate
The Auto Rotate function is effective only when the print data
length is shorter than the printable width of the roll paper (300,
400, or 600 mm, 12, 14, 20, 22, 24, 36, or 44 inches). The print data
will automatically be turned 90 degrees to print crosswise, saving
roll paper. This function is not available when Roll Paper (Banner)
is selected from the Paper Source list.
Also, when you use this function, you can set the paper width.
Note:
44 and 36 inch roll paper are for Stylus Pro 9600 only.
Original Auto Rotate onAuto Rotate off
To Next Page
Loading...
