66
PAPER CONFIG
This menu contains the following items.
PAPER NUMBER
When STANDARD is selected, the printer determines paper
thickness automatically. Select No. X (X can be any number
between 1 and 10) and set the following items.
❏ THICKNESS NUMBER
❏ CUT PRESSURE
❏ CUT METHOD
❏ PPR FEED ADJ
❏ DRYING TIME
❏ SUCTION
❏ PRINT ADJ
THICKNESS PAT
Prints the paper thickness detection pattern. If STANDARD is
selected in PAPER NUMBER, the pattern is not printed.
THICKNESS NUM
After confirming the paper thickness detection pattern, the
number for the print pattern with the smallest gap is entered.
CUT PRESSURE
Sets the cutter pressure (0 to 100%) for cutting paper. Lower the
pressure to cut weaker paper.
To Next Page
Loading...
