Epson Stylus Pro 7600 - Details of Selectype

58
1. Enter the SelecType mode
Make sure that READY is displayed on the LCD panel, then
press the SelecType (
r) button.
2. Select a menu
Press the Paper Feed (
u) or Paper Feed ( d) button to select
a desired menu.
3. Select an item
Press the SelecType (
r) button. The first item of the selected
menu is displayed. Press the Paper Feed (
u) or Paper Feed
(
d) button to select a desired item.
4. Select a parameter
Press the SelecType (
r) button. The first item of the selected
menu is displayed. Press the Paper Feed (
u) or Paper Feed
(
d) button to select a desired item.
5. Set the parameter
Press the Enter button to store the selected parameter.
If the parameter is for execution only, press the Enter button
to execute the function for the item. After execution, the
printer exits SelecType mode and return to the READY status.
Press the Paper Source (
l) button to return to step 3 if you
want to select another item.
6. Exit the SelecType mode
Press the Pause button.
Note:
To exit the SelecType mode at anytime, press the Pause button.
Details of SelecType
PRINTER SETUP
This menu contains the following settings.