102
Save Roll Paper
Select this check box when you wish to save roll paper. When this
check box is selected, the blank portion of the last page of your
document is not fed through the printer. This function is available
only when Roll Paper (Banner) is selected from the Paper Source
list.
Fitting documents onto the page
You can fit the size of your document to the size of the paper you
will print on. Open the “Layout menu” and check the
Reduce/Enlarge box to adjust the print size.
Use the Reduce/Enlarge options on the “Layout menu”.
Selecting this setting proportionally enlarge or reduces the size of
the image to make it fit the paper size you selected in the Paper
Size list. To use this function, click On and select the paper size
you loaded in the printer.
Auto Cut Print Page Line Printer’s Operation
Selected Selected Prints page line on the right side
only, and cuts paper
automatically after the print job.
Selected Not selected Cuts paper automatically after
the print job.
Not selected Selected Prints page lines on the right side
and below the document.
Not selected Not selected Does not print page lines nor cut.
Fit to Page Proportionally enlarges or reduces the size of your
document to make it fit the paper size you select in
the Paper Size list in the Reduce/Enlarge box.
Custom Lets you define the percentage you want to enlarge
or reduce an image. Click the arrows next to the
Scale box to select a proportion from 10 to 650%.
To Next Page
Loading...
