151
Adjusting page settings
You can adjust the followings in the “Page Setup dialog box”.
No Margins
Using this setting, you can print your image without margins on
the paper.
For this printing mode, EPSON recommends the following media
conditions.
Recommended media type:
❏ Premium Glossy Photo Paper (250)
❏ Premium Semiglossy Photo Paper (250)
❏ Premium Luster Photo Paper
❏ Premium Semimatte Photo Paper (250)
Accommodate media width
❏ 8 to 8.25in
❏ 250mm to 10in (254mm)
❏ 300mm to 12in (304.8mm)
❏ 350mm to 14in (355.6mm)
Cut Method From the pop-up menu, select a Cut Method for thin
paper. You can select from Standard, Thin Paper or Very
Thin Paper.
Mode Description
To Next Page
Loading...
