Pro 7900 and 9900 Field Repair Guide 10/6/10
Ink Bay Installation (Right) Printer Component, Software Item, LCD Display, Printer Button Page 145.
10. Connect the Air Pressure Line.
11. Install the Cleaning Unit (if it was removed).
12. Perform the
Ink Holder Assy Adjustment.
13. Install Ink Cartridges and turn on the Printer.
Note: If the Printer does not start to charge (prime) turn on the Ink Charge Flag. Follow the directions in
the Initial Ink Charge chapter in the Adjustment Section.
14. Install the Side Cover (Right).
Connect the Air Pressure
Line, and place it in the
Guide.
View from the back.
To Next Page
Loading...
