Pro 7900 and 9900 Field Repair Guide 10/6/10
TBS Pos Adjustment Printer Component, Software Item, LCD Display, Printer Button Page 352.
TBS Pos Adjustment
Note: The TBS Pos Adjustment sets the correct margins. This Adjustment requires A3 paper.
1. Enter Self Testing Mode.
1.1 Self Testing Mode: Down, Right, and OK buttons, and turn on the Printer.
2. Load A3 paper (A3= 11.7”x 16.5”)(A3= 297mm x 420mm)
3. Print the TBS Pos Adjustment Pattern.
3.2 Navigate to SELF TESTING\Mecha Adjustment\TBS Pos\Printing\[Enter] Print
3.3 Press the Enter button to print
3.4 The Printer will print the alignment pattern.
To Next Page
Loading...
