Pro 7900 and 9900 Field Repair Guide 10/6/10
Printer Error Codes (Maintenance) Printer Component, Software Item, LCD Display, Printer Button Page 192.
Printer Error Codes (Maintenance)
0002 Carriage Motor / Ink Tube is near end of life perform (Clear Counter (when replacing CR
motor))and (Clear Counter (when replacing Ink Tube)
0008 RTC error (Replace the Battery and initialize the RTC with the Adjustment Wizard’s RTC &
USBID routine.
0010 Flushing Box Voltage error (Dirty flushing box grid or bad cable connection) Technician
Required to repair.
0040 Cleaning Unit near end of life (Clear Counter [when replacing Pump Motor])(Pump Assy,
Pump Motor, Cap Assy, Wiper Blade, Flushing Box).
0080 Date is not set (initialize the RTC with the Adjustment Wizard’s RTC & USBID routine.)
0088 RTC Battery low (Replace the battery, initialize the RTC with the Adjustment Wizard’s RTC &
USBID routine.)
0800 The Drip Pads in an Ink Bay is near end of life. Clear Counter (when replacing Cartridge
holder (Ink Pad)).)
1000 The PK/MK Ink Selector is near end of life. Clear Counter (when replacing Ink select
motor).
4000 After 2 attempts, the AID circuitry can detect no nozzles. Technician Required to repair.
To Next Page
Loading...
