Pro 7900 and 9900 Field Repair Guide 10/6/10
Input MAC Address Adjustment Printer Component, Software Item, LCD Display, Printer Button Page 324.
11. Send the MAC Address to the Printer.
1. Enter the last 6 digits
of the Printer’s MAC
Address here.
2. Click on Run. It will
take a few minutes
to complete. If it
fails, try again.
4. Click on OK to com-
plete.
5. Run Epson Net Con-
fig and reset the
Printer’s IP settings to
the users preference.
Note: if the procedure fails,
reboot the Printer, verify that it is “Ready”, and retry.
To Next Page
Loading...
