Pro 7900 and 9900 Field Repair Guide 10/6/10
Revision History Printer Component, Software Item, LCD Display, Printer Button Page 433.
June 18, 2009
1. The Printer Error Codes (Service) chapter was updated to reflect new data on the 1497 Error.
2. The Board (Main) installation chapter was modified to reflect new information on Generic
Parameter installation.
3. The NVRAM Backup Utility chapter was modified to reflect new information on Generic Parameter
installation.
4. The PF Slant Adjustment Chapter was modified to reflect the newly released procedure.
May 28, 2009
1. A Connector and Wiring chapter was added.
2. Control Panel Map was modified to reflect new data.
3. A chapter on Servprog.exe was added to the utility section.
4. The Cutter Blade Assembly Removal chapter was modified.
5. The Firmware History chapters were updated.
6. A chapter on the NVRAM.exe utility was added to the Utility section.
7. A chapter titled Cleaning Cycles (Types and Uses) was added to the Reference section.
8. A chapter titled Damper Assembly Pictures was added.
9. A chapter titled Carriage Assembly Pictures was added.
To Next Page
Loading...
