Epson Stylus Scan 2000 User Manual

7
System Requirements
English
Your computer should also meet the following system requirements.
Your computer dealer can help you update your system if it does not meet these
requirements.
❚ For Macintosh computers
You can use this device with the following Apple
®
Macintosh
®
computers. You also
need a shielded USB cable.
Supported computer models:
iMac Series (for USB)
Power Macintosh G3 (for USB)
Your Macintosh must also meet the following system requirements.
Note:
Macintosh can be connected to the Stylus Scan by using a USB cable only.
Note:
❏ The amount of available memory varies according to the number and kind of
applications that are open. To see how much memory is available, choose
About
This Computer
from the Apple menu and refer to the memory size (listed in
kilobytes) under Largest Unused Block (1,024K=1 MB).
❏ The memory requirements above are for printing on Letter size paper. These
requirements may vary depending on the size of the paper, the type of applica-
tion you are using, and the complexity of the document you want to print.
In addition to these system and memory requirements, you also need 10 MB of free
hard disk space to install your EPSON Stylus Scan software. To print, you need extra
hard disk space amounting to about double the size of the file you want to print.
Minimum System Requirements Recommended System
i486/25 MHz for Windows 95
i486/66 MHz for Windows 98
Pentium or higher processor
32 MB RAM 32 MB RAM or more
50 MB hard disk space 50 MB or more free disk space
VGA size, 16 bit color SVGA or better 24 bit color
Minimum System Requirements Recommended System
System 8.1 + iMac Update 1.0 System 8.5.1 or later
7 MB of available memory
12 MB of available memory when
background printing is turned on.
14 MB or more of available memory
23 MB of available memory when
background printing is turned on.

Epson Stylus Scan 2000 Specifications

General

Brand	Epson
Model	Stylus Scan 2000
Category	All in One Printer
Language	English