Microsoft Windows standard drivers use scalable TrueType”
fonts rather than the fonts built into the printer. Windows fonts
appear the same on the screen as they do in your printed
document. (This feature is called
WYSIWYG,
What You See
Is
What You Get.) All programs that run under Windows can use
the Windows printer driver to print their files. Therefore, you
have access to the full range of TrueType fonts if you use the
Windows Stylus
400,
Stylus
300,
Stylus
800,
AP-3250,
or LQ-870
driver.
If you want to use the printer’s internal fonts and the TrueType
fonts, contact Microsoft Windows Product Support.
WordPerfect
®
6.0
or
5.1
for MS-DOS
®
If your current version of WordPerfect does not support the
EPSON Stylus
400,
contact WordPerfect for details on
obtaining the correct driver.
Until your Stylus
400
driver arrives, you may want to install
the driver for one of the printers listed below:
EPSON
ActionPrinter”
3250
EPSON
LQ-870
Note:
lf
you choose the
LQ-870
printer in WordPerfect, be sure to select
Sheet feeder Bin
1
in the
Printer Setup
screen.
If you have already installed WordPerfect for MS-DOS and you
want to add the WordPerfect Stylus
400
driver, follow the
instructions below:
1.
Select File and Print (or press Shift
F7).
2.
Type
S
(for Select Printer).
Setting Up Your Printer
1-19
To Next Page
Loading...
