Cleaning
the
Printer
To keep your printer operating at its best, you should clean it
thoroughly several times a year.
1.
Make sure the printer is turned off.
2.
Remove any paper from the paper feeder.
3.
Use a soft brush to carefully brush away all dust and dirt.
4.
If the outer case or the inside of the paper feeder is dirty,
clean it with a soft, clean cloth dampened with mild
detergent. Keep the printer cover closed to prevent water
from getting inside.
5.
If the inside of the printer accidentally gets soiled with ink,
wipe it off with a damp cloth.
e
Caution:
0
Never use alcohols or thinners to clean the printer; these
chemicals
can damage the components as well as the case.
0
Be careful not to get water on the printer mechanism or
electronic components.
0
Do not use a hard or abrasive brush.
Q Do not spray the inside
of
the printer with lubricants;
unsuitable oils can
damage
the mechanism. Contact your
dealer
or a qualified service person
if
lubrication is needed.
3-4
h4aintenance and Troubleshooting
To Next Page
Loading...
