0
Because most application programs take care of the top and
bottom margins, you should usually adjust the margins by
using your programs, taking the printer’s default loading
position into account. You can change the default loading
position. See “Using the Default-Setting Mode” in
Chapter
2.
0
The default page length for paper loaded from the paper
feeder is
61
lines (letter-size paper) and
65
lines
(A44ze
paper). You can change it using your application program
or printer commands, if necessary. See the Appendix for
more about printer commands.
0
If the ink does not dry fast enough, try removing sheets
‘one at a time as they finish printing.
Setting Up Your Printer
1-23
To Next Page
Loading...
