2.
Insert a single sheet of paper into the slot until it meets
resistance, aligning the right edge of the paper with the
arrow mark on the printer. The printer automatically loads
the sheet.
Note:
lf
the sheet does not load straight,
press
the
Load/Eject
button
to eject it. Then
try
loading it again.
3.
Now give your print command. When the printer receives
the data, it begins printing.
When the printer finishes printing, it ejects the sheet
automatically. If the sheet does not come all the way out,
press the Load/Eject button.
4.
You can print as many sheets as you like from the manual
slot. When you
want’to
switch to the paper feeder, press
the Load/Eject button without inserting a sheet into the
manual slot. The printer then loads a sheet of paper from
the paper feeder.
Using Other Prinfer Functions
2-3
To Next Page
Loading...
