Epson SureColor P-Series Setup Guide

Installing the software | 31
Installing the software
Download and run your product’s software package:
• www.epson.com/support/p10000 (U.S.) or www.epson.ca/support/p10000 (Canada)
• www.epson.com/support/p20000 (U.S.) or www.epson.ca/support/p20000 (Canada)
Follow the instructions on the screen to run the setup program.
Updating your printer firmware
To keep your printer features and functionality up to date, you should periodically check for a new version
of firmware on the Epson support site and update your printer, if necessary.
Checking the current firmware version
1. Press the Menu button.
2. Press the d button until Setup is highlighted, then press OK.
3. Press the d button until Printer Status is highlighted, then press OK.
4. Press the d button again until Firmware Version is displayed, then press OK. Note the firmware
version displayed. When finished, press the
y back button.
Updating the firmware
Before updating your printer’s firmware, make sure your printer is turned on, connected to your computer
or network, and that the LCD screen shows the READY status.
1. Visit the support page for your product:
• www.epson.com/support/p10000 (U.S.) or www.epson.ca/support/p10000 (Canada)
• www.epson.com/support/p20000 (U.S.) or www.epson.ca/support/p20000 (Canada)
2. Click Drivers & Downloads.
3. Click Firmware.
4. Click Download.

Epson SureColor P-Series Specifications

General

Brand	Epson
Model	SureColor P-Series
Category	Printer
Language	English