2. Turn the product off.
3. Press and hold the paper/cancel button and turn the product on.
The product turns on and prints a nozzle check pattern.
4. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
5. If there are gaps or the pattern is faint, clean the print head.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours. Then
try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or
damaged and needs to be replaced.
Parent topic: Print Head Nozzle Check
Related tasks
Removing and Installing Ink Cartridges
Cleaning the Print Head Using the Control Panel
107
To Next Page
Loading...
