Product Light Status
You can often diagnose problems with your product by checking its lights.
Lights
1 network
2
power
3
paper/cancel
4 ink
Light status Condition/solution
The product is turned on and ready to print.
The power light is on
One of the following has occurred:
The power light is flashing
• The product is starting up
• The product is shutting down
• Ink Density Optimization is in progress
• Ink cartridges are being replaced
• The product is checking the network connection
• Head cleaning is in progress
• The product is receiving data or printing
• The firmware is being updated
123
To Next Page
Loading...
