1. Load several sheets of plain paper (or a cleaning sheet) of this size in the sheet feeder: A3
(11.7 × 16.5 inches [297 × 420 mm])
Note: If you are using a cleaning sheet, insert the sheet with the adhesive side facing up and the
non-adhesive portion of the page at the bottom.
2. Press the paper/cancel button to feed the paper through the product.
3. Repeat these steps as necessary until no ink appears on the back of your printouts. If you are using
a cleaning sheet, run it through up to three times.
Parent topic: Adjusting Print Quality
118
To Next Page
Loading...
