225
1. Load paper of the same type and different size into Roll 1 and Roll 2.
2. Select > General Settings > Printer Settings > Paper Source Settings > Roll Paper Setup >
Roll Switching > Auto > Paper Width from the printer’s control panel.
3. Choose from the following:
• Select Optimize Margins to print on the roll paper with smaller margins.
• Select Width Match to print on the roll paper with the same paper width as the print job.
Note: Select Disable to print regardless of the paper width.
4. Choose from the following:
• Windows: Display the printer driver's Printer Settings screen, and then select Roll Auto as the
Source setting.
To Next Page
Loading...
