310
Maintenance and Transportation
See the instructions in these sections to maintain your printer for optimum results, or to move or
transport your printer.
Replacing the Cutter
Cleaning Your Product
Cleaning the Platen and Borderless Pad Edges
Wiping Around the Print Head
Cleaning the Print Head Cap Area
Moving or Transporting Your Product
Replacing the Cutter
If you notice that your paper does not cut cleanly, you may need to replace the cutter. You will need a
Phillips-head screwdriver.
Caution: Store the replacement cutter out of the reach of children. Do not remove the protective material
from the new cutter until instructed to do so. Do not drop the cutter or knock it against anything or you
may chip the blade.
1. Remove all paper from the printer.
2. Select the icon.
3. Select Maintenance > Replace Auto cutter blade > Start.
The cutter moves to the replacement position.
To Next Page
Loading...
