232
2. Press the home button, if necessary.
3. Select Memory Device.
4. Select the menu option that matches the format of the file you want to print.
5. Do one of the following to select a single image to print:
• For JPEG: Select an image and select Proceed to Print (a check mark will appear on the
selected image). Select Single View to view the selected image individually.
• For TIFF or PDF: Select a file name from the list on the screen.
Note: Files in formats other than JPEG, TIFF, or PDF are not displayed on the LCD screen. Any
characters in the folder or file names that cannot be displayed by the printer are displayed as a
question mark.
6. Select the paper source and either B&W or Color.
7. Select the Advanced tab and select any necessary settings. You can select Reduce/Enlarge to set
the reduce/enlarge ratios. If you set Auto Fit Page to On, printing is performed by automatically
enlarging to fit the width of the roll paper or the size of the cut sheet paper loaded in the printer.
Note: You can select Presets to use a previously saved group of settings. The Preview button
allows you to check the print image (JPEG, TIFF, or PDF only).
8. Select Print to begin printing.
Memory Device Settings Menu
Parent topic: Printing from a USB Memory Device
Memory Device Settings Menu
You can select the following memory device settings.
Note: Settings may vary depending on the selected printer driver.
Basic Settings
Setting Options Description
Copies 1 to 99 Specifies the number of copies to print
To Next Page
Loading...
