36
Parent topic: Introduction to Your Printer
Changing the Sleep Timer Settings
You can adjust the time period before your product enters sleep mode and turns off the LCD screen.
Note: The default setting is 15 minutes.
1. Select the home icon, if necessary.
2. Select the icon.
3. Select General Settings > Basic Settings > Sleep Timer.
You see a screen like this:
4. Do one of the following:
• Press the + or – button to increase or decrease the number of minutes.
• Press the number to display the on-screen keypad, select the number of minutes (between 1 and
120), and select OK.
5. Select OK.
When your product enters sleep mode, the control panel's screen goes dark, but the power light
remains on.
Parent topic: Using Power Saving Settings
To Next Page
Loading...
