252
Setting Options Description
Auto Cleaning On Select the option to automatically perform a
print head check and cleaning when the
printer turns on and before printing
Select Standard to set a normal automatic
cleaning, or Custom to set the timing and
frequency of automatic cleaning from the
following options:
• Nozzle Check Schedule: Sets whether to
perform a nozzle check during printing or
only after printing has finished
• Nozzle Check Sensitivity: Adjusts the
number of clogged nozzles that trigger a
cleaning cycle
• Nozzle Check Result Notice: Sets
whether the printer reports if there are still
clogged nozzles after automatic cleaning
Off Disables the print head checking and
automatic cleaning
Printing Language* USB
Network
Select the printing language to use for each
connection mode
Auto: select for most printing situations
HP-GL/2: select if HP-GL/2 or HP RTL print
data sent from a CAD application does not
automatically switch the printing mode
PS: select if PS print data does not
automatically switch the printing mode
(available only on models with Adobe
Embedded Print Engine)
Universal Print Settings* Various options See the Universal Print Settings table below
HP-GL/2 Unique Settings Various options See the HP-GL/2 Unique Settings table
below
To Next Page
Loading...
