339
• If you are transporting or storing the product below 14°F (–10°C), you must discharge the ink. See the
link below for instructions.
• Make sure the print head is capped (the print head is positioned at the far left) before storing the
product. If the print head is left uncapped for a long period of time, the print quality may decline.
Note: Before storing your product for a long period, replace low, expended, or expired ink to help
prevent the print head from drying out. Store your product in a cool, dry place.
1. Remove all the paper from the product.
2. Turn off the product.
3. Unplug the power cable.
4. Disconnect any connected cables.
5. Remove the output tray, if necessary.
6. Close all covers on the product.
7. Unlock the casters on the front of the product.
To Next Page
Loading...
