377
3 Top margin: 0.12 to 0.59 inches (3 to 15 mm)*
4 Printable length: up to 298 feet (91 m)**
Note: Actual maximum print length depends on print application, paper size, printer driver
settings, and operating system.
5 Bottom margin: 0.12 to 1.77 inches (3 to 45 mm)*
* For these paper types the default top and bottom margins are 0.8 inch (20 mm): Epson Premium
Glossy Photo Paper (250), Epson Premium Semigloss Photo Paper (250), Epson Premium Luster Photo
Paper (260), and Epson Premium Semimatte Photo Paper (250). When printing on Epson Singleweight
Matte Paper in CAD/Line Drawing mode, the default top and bottom margins are 0.12 inch (3 mm).
** The maximum printable length using the Epson driver on Windows is 298 feet (91 m). To print longer
images, you need to use third-party banner printing software and select Roll Paper (Banner) as the
Source setting in the printer driver.
Note: Actual maximum print length depends on print application, paper size, printer driver settings, and
operating system. Even if the margins change, the printed size does not change.
Note: Printing is distorted when the trailing edge of the roll paper comes off the core. Make sure the
trailing edge does not come inside the printing area.
Cut sheets
Note: When printing borderless, the left and right margins are set to 0. (Borderless printing is not
available with poster board.)
To Next Page
Loading...
