Epson T6-602S - Page 10

viii Safety and Installation (T, VT / EPSON RC+ 7.0) Rev.15
Control System Configuration
T series Manipulator system are configured by a combination of the following
software.
T3-401S
Controller Firmware
Ver. 7.3.51.1 or later
EPSON RC+ 7.0
Before Ver.7.3.0
!!!
Ver.7.3.1 or later
OK
T6-602S
Controller Firmware
Ver. 7.3.53.0 or later
EPSON RC+ 7.0
Before Ver.7.3.3
!!!
Ver. 7.3.4 or later
OK
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are
available.
!!!: Compatible Connection is OK. It is recommended to use the following
versions or later. Display or control may not be operated
properly.
T3-401S : EPSON RC+7.0 Ver.7.3.1
T6-602S : EPSON RC+7.0 Ver.7.3.4