Epson TM-J7200 series - Setup; Removing Protective Materials

Version 3.00 Feb. 2019
7
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-J7200/ TM-J7700)
3.1.2. List Properties
The List Properties are explained in the following.
List Property Settings
CharacterSetList “997”
JrnLineCharsList “”
RecLineCharsList
(When 82.5 mm is set)
“42,56” / “46,64"
*1
RecLineCharsList
(When 76 mm is set)
“40,53” / "43,60"
*1
RecLineCharsList
(When 70 mm is set)
“36,48” / "39,54"
*1
RecLineCharsList
(When 58 mm is set)
“30,40” / "32,45"
*1
SlpLineCharsList (TM-J7200)“48,64” / "52,72"
*2
(TM-J7700)”80,106”/”87,120”
*2
RecBarCodeRotationList “0,R90, L90, 180”
RecBitmapRotationList “0,R90, L90, 180”
SlpBarCodeRotationList “0,180”
SlpBitmapRotationList “0,R90, L90, 180”
FontTypefaceList ”OCR-B”
*1
Memory SW8-7 is set to ON.
*2
Memory SW8-6 is set to ON.