Epson TM-J7200 series - Cautions on Handling

Version 3.00 Feb. 2019
iii
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-J7200/ TM-J7700)
Contents
SECTION 1. INTRODUCTION.......................................................................................1
SECTION 2. DETAILS ON SETTINGS..........................................................................2
2.1 References of Firmware Versions ............................................................................2
2.2 Settings of DIP Switches .......................................................................................... 2
2.3 Port Information ....................................................................................................... 2
2.4 Device
Settings .........................................................................................................3
2.4.1. Usable Device Specific Settings........................................................................ 3
2.4.2. Paper Width Setting .........................................................................................4
SECTION 3. FUNCTION DETAILS ...............................................................................5
3.1 Property Set Values and Default Values.................................................................5
3.1.1. Capability Set Values........................................................................................5
3.1.2. List Properties...................................................................................................7
3.1.3. Width and Height Properties ...........................................................................8
3.1.4. Common Property Strings .............................................................................. 10
3.1.5. PageMode Print Properties............................................................................. 11
3.2 Methods...................................................................................................................12
3.3 Escape Sequences ................................................................................................... 13
3.4 Printable Barcode
type ........................................................................................... 16
3.5 Power Condit
ion Reports........................................................................................ 16
3.6 Synchronous Processing ......................................................................................... 16
3.7 Printing Positions ...................................................................................................17
3.8 Electronic Logo Function (NVRAM) ...................................................................... 18
3.9 Printable Bitmap Types an
d Sizes......................................................................... 18
3.10 Maintenance Counter ........................................................................................... 19
3.11 Automatic Recovery Function ..............................................................................19
3.12 OCR-B Font Printing............................................................................................20
3.13 Output without Flow Control on the USB/Ethernet Interfaces ......................... 21
SECTION 4. WARNINGS..............................................................................................22