Epson TM-J7200 series - Part Names and Functions; Front Side Components

Version 3.00 Feb. 2019
3
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-J7200/ TM-J7700)
2.4 Device Settings
The following explanation is about the settings for TM-J7x00.
2.4.1. Usable Device Specific Settings
For the TM-J7x00, the following Device Specific Settings are settable by the
SetupPOS utility. For the detail, please refer to the Section 2 of “EPSON OPOS
ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)”
Tab Settings
Disable panel buttons
Assume print complete when data output finishes
Ignore firmware version check
Homogenize Error Codes
General
Output complete timeout
Paper Type Paper
Paper Width [mm]: LineWidth [dot]: LineCharsList
TMFlogo... Bitmap
NVRAM
Halftone: Method
Halftone: Brightness
Color Bitmap
Color: Primary
ERROR
OFFLINE
Log file name (include full path)
Status Log
Maximum file size [KB]
Slip font size type Default Value
Receipt font size type
Receipt Characters per Line
Receipt Line Spacing [dots]
Slip Characters per Line
Slip Line Spacing [dots]
Printing Properties
CharacterSet [CodePage Number]