Version 3.00 Feb. 2019
4
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-J7200/ TM-J7700)
2.4.2. Paper Width Setting
The models support the following paper width. After adding the
TM-J7200,TM-J7700 by the SetupPOS utility, open the “Device Specific Settings”
dialog box. In the “Paper” tab the paper width could be selected.
The settable paper widths are as follows:
z 76.0 mm [480 dots]
z 82.5 mm [512 dots]
z 69.5 mm [432 dots]
z 57.5 mm [360 dots]
The default paper width is set to 76.0 mm.
To Next Page
Loading...
