Version 3.00 Feb. 2019
2
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-J7200/ TM-J7700)
Section 2. Details on Settings
This section describes connection configurations and how to make the settings for the
TM-J7x00 printers.
2.1 References of Firmware Versions
Refer to the release notes (Relnote.txt).
2.2 Settings of DIP Switches
Not applicable
2.3 Port Information
1) Port information wh
en using USB port
Not applicable
2) Port information when using Ethernet port
The port information that can be set with the SetupPOS utility is as follows.
Item Setting range
Output buffer length [byte] 32 to 1024
Output interval time [ms] 0 to 9999
The default settings are as shown in the following table.
Item Setting range
Output buffer length [byte] 1024
Output interval time [ms] 2500
To Next Page
Loading...
