Epson TM-J7200 series - Installing the Printer

Version 3.00 Feb. 2019
8
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-J7200/ TM-J7700)
3.1.3. Width and Height Properties
The width and height properties are explained in the following.
Settings Property
Default
Value
Maximum
value [dot]
Minimum
value [dot]
RecLineSpacing 30 255 0
JrnLineSpacing X X X
SlpLineSpacing 30 255 0
SlpLineHeight [dot] 24,17
RecLineHeight [dot] 24,17
JrnLineHeight [dot] X
SlpLineWidth [dot] (TM-J7200) 576
(TM-J7700) 960
RecLineWidth [dot]
(When 82.5 mm is set)
512
RecLineWidth [dot]
(When 76 mm is set)
480
RecLineWidth [dot]
(When 70 mm is set)
432
RecLineWidth [dot]
(When 58 mm is set)
360
JrnLineWidth [dot] X
RecSidewaysMaxLines
(When 82.5 mm is set)
17
*5
RecSidewaysMaxLines
(When 76 mm is set)
16
*5
RecSidewaysMaxLines
(When 70 mm is set)
14
*5
RecSidewaysMaxLines
(When 58 mm is set)
12
*5
RecSidewaysMaxChars
(When 82.5 mm is set)
(Font A) 69, 75
*1
(Font B) 92, 104
*1
RecSidewaysMaxChars
(When 76 mm is set)
(Font A) 73, 80
*1
(Font B) 97, 110
*1
RecSidewaysMaxChars
(When 70 mm is set)
(Font A) 82, 89
*1
(Font B) 109, 123
*1
RecSidewaysMaxChars
(When 58 mm is set)
(Font A) 98, 106
*1
(Font B) 130, 147
*1
RecLinesToPaperCut 7
*3
SlpSidewaysMaxLines (TM-J7200) 19
*5
(TM-J7700) 32
*5