Version 3.00 Feb. 2019
1
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-J7200/ TM-J7700)
Section 1. Introduction
This manual describes the method of use and related items, as well as machine-specific
precautions, when the EPSON TM-J7200,TM-J7700 Series POS Printers are used with the
EPSON OPOS ADK program.
This manual applies to the following devices.
Device List
USB Ethernet
TM-J7200U TM-J7200E
TM-J7700U TM-J7700E
Before reading the manual, see the following explanation about the characteristic of the
TM-J7200,TM-J7700 models.
z Station: Receipt (Serial Ink Jet 180 dpi X 180 dpi)
Slip (Serial Ink Jet 180 dpi X 180 dpi)
Hereafter, regardless of I/F, the above models are referred to as TM-J7200,TM-J7700.
The generic term for TM-J7200,TM-J7700 are also referred to as TM-J7x00.
Compatibility mode
The compatibility mode for upward compatibility was added in OPOS Ver2.60.
For the details of the compatibility mode, please refer to “EPSON OPOS ADK MANUAL
APPLICATION DEVELOPMENT GUIDE Compatibility Mode”.
To Next Page
Loading...
