Version 3.00 Feb. 2019
18
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-J7200/ TM-J7700)
3.8 Electronic Logo Function (NVRAM)
TM-J7x00 models feature an electronic logo function (NVRAM). To use NVRAM,
startup TM-J7200, TM-J7700 utility from “Device Specific Settings” of SetupPOS
utility, and register image files (BMP style) with NVRAM in advance.
For the details of the registration, please refer to the “TM-J7200,TM-J7700 Utility
User's Manual”.
To print image files registered with NVRAM, please use the either of the following
DirectIO:
PTR_DI_FLASH_BITMAP
PTR_DI_FLASH_BITMAP2.
Please refer to the corresponding part of the Section 4 of “EPSON OPOS ADK
MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)” for
detail. The available NVRAM sizes are as follows:
TM-J7x00 :393216 bytes.
3.9 Printable Bitmap Types and Sizes
The TM-J7x00 models support the following
bitmap commands. For the detail,
please refer to the Section 3
of “EPSON OPOS ADK MANUAL APPLICATION
DEVELOPMENT GUIDE POSPrinter (TM Series)”. The allowance ranges for
bitmaps are as follows.
z TM-J7200 and TM-J7700
Allowance range
Bitmap command type
x y xy
NV bitmap 1~8192 1~2304
Download bitmap 1~8192 1~2304
Column Format bitmap 1~2048 1~64
To Next Page
Loading...
