Epson TM-m50II - Appendix; Product Specifications

100
Appendix
Appendix
Product Specifications
Printing method Thermal line printing
Printing direction Two directional with friction feed
Paper feed speed 200 mm/s {5.9"/s}
(continuous paper feeding with the Feed button)
Cutting method Selectable between partial cut (leaving one point in the center
uncut) and full cut.
*1
Default: partial cut
Interface USB-A Supplies up to 0.5 A, USB 2.0 High-Speed
USB-B USB 2.0 Full-Speed
Serial RS-232C
Ethernet 10BASE-T/100BASE-TX
Wireless LAN Use the optional wireless LAN unit
Buffers Receive buffer 4 KB
Downloaded buffer
(user-defined characters and
user-defined images)
12 KB
NV graphics memory 384 KB
Barcode/two-dimensional symbol printing UPC-A, UPC-E, JAN8 / EAN 8, JAN13 / EAN13, Code39, Code93,
Code128, ITF, CODABAR(NW-7), GS1-128, GS1 DataBar,
Code128 auto, PDF417, QR code, Maxi Code, Data Matrix,
Aztec Code, Two-dimensional GS1 DataBar, Composite
Symbology
Cash drawer function 2 drives
Supplied voltage Power supply by AC adapter (PS-190 recommended)
Current consumption
*2
(at 24 V) 1.8 A
AC power consumption
(100 to 230V/
50 to 60 Hz)
*2
Operating Approx. 31.7 W (AC 115 V/60 Hz)
Standby Approx. 1.0 W (AC 115 V/60 Hz)
Life
*3
Printer mechanism 20 million lines (printing + paper feeding)
Thermal head 200 km
Autocutter Partial cut: 2.2 million cuts
Full cut: 1.5 million cuts
Note:
If both partial cut and full cut are used, cut life varies from the
above depending on usage conditions.