33
Chapter 2 Setup
Connecting the Optional Customer Display
You can connect the customer display (DM-D30/DM-D70) to this product, using USB connection.
For more information, refer to the user’s manual for the customer display.
1
Make sure the printer is turned off.
2
Connect the USB cable from the customer display to the USB-A connector on the
printer.
If you want to use both the customer display (DM-D30) and the wireless LAN unit, you can connect
the wireless LAN unit to the customer display. For more details, refer to the user’s manual of the
customer display.
To Next Page
Loading...
