Epson TM-m50II - Web Config; How to Start Web Config

75
Chapter 3 Advanced Usage
Web Config
Web Config is a printer's built-in web page that allows you to check and change printer settings on your
browser.
To use Web Config, you need to set your computer's IP address to the same segment as the printer.
How to Start Web Config
1
Start your web browser on a computer or smart device on the network and enter the
IP address of the printer in the address field.
2
After Web Config starts, select the menu you wish to configure.
3
When the authentication screen appears, enter your password and log in.
The default password is as follows:
Example for HTTPS Example for HTTP
IPv4: https://192.0.2.111/
IPv6: https://[2001:db8::1000:1]/
IPv4: http://192.0.2.111/
IPv6: http://[2001:db8::1000:1]/
Password label Password
Attached on the product Printed on the label
Not attached on the product Serial number
(10-digit alphanumeric characters, case-sensitive)