32
Chapter 2 Setup
Connecting the Optional Wireless LAN Unit
Using the optional wireless LAN unit (OT-WL06) allows you to connect the printer via Wi-Fi.
For details, see the Technical Reference Guide for the optional wireless LAN unit.
1
Make sure the printer is turned off.
2
Connect the optional wireless LAN unit to the USB-A connector on the printer.
For details on how to connect the unit, refer to the user's manual of the wireless LAN unit.
Depending on the installation conditions of the printer and the routing for cables connected to it, the
status of the radio waves for the Wireless LAN unit may decline. If this does happen, use an extension
cable.
To Next Page
Loading...
