Epson TM-T20II - Page 20

20
3
Click[TCP/IP]under“Configuration”.
4
The“TCP/IPSetting”screenappears.Configurethenetworksettings.Whenfinished,click
the[SUBMIT]button.
•GetIPAddress: Select[Manual].
•SetusingAutomaticPrivateIPAddressing(APIPA):
Select[Disable].
•SetusingPING: Select[Enable].
•IPAddress: SettheIPAddress.
•SubnetMask: SettheSubnetMask.
•DefaultGateway: SettheDefaultGateway.