Epson TM-T20II

9
Chapter 2 Installation
2
Installation
ThischapterexplainstheproceduresforinstallinganduninstallingtheTM‐T20IIprinterdriver.
Installing the Printer Driver
Installing
1
Connecttheprintertothecomputerwithaninterfacecable,loadpaper,andthenturnon
theprinter.
IfyouareonanEthernet/wirelessconnection,connecttothenetworkandthenturnontheprinterpower.
2
ClickTM‐T20II_xxx.dmginthelocationwhereyousavedit.Double‐clickTM‐
T20II_xxx.pkgtostarttheinstaller.
3
TheʺWelcometotheTM‐T20IIMacPrinterDriverInstallerʺscreenappears.Clickthe
ʺContinueʺbutton.
 The screens of Mac OS X 10.6 are shown in this chapter. If you are using a different version
of Mac OS, proceed as appropriate for the screens in your version.
 Close [Print & Fax] in [System Preferences] before installing or uninstalling the printer driver.
 While settings are being saved, do not turn off the printer power or disconnect the printer.
To install or uninstall the print driver, an administrator “Name” and “Password” is necessary.