Chapter 1 Product Overview
23
1
No Connection to External Devices
When connection to external devices is not possible, check the status LED at the back of the
printer.
When the status LED is lit in green
•Check whether the interface cable or the optional wireless LAN cable set is connected cor-
rectly. (See "Connecting to External Devices" on page 94.)
•Print the status sheet to check whether the network settings are correct. (See "Confirming Net-
work Setting" on page 59.)
When the status LED is lit in orange
When the status LED is off after turning on the printer or remains lit in orange even if 30 seconds
have passed after turning on the printer, the interface board needs repairing.
To Next Page
Loading...
