30
Printable Area
In 2-divided energizing, the print position within the printable area of the thermal elements
for dots 1 to 256 and 257 to 512 is shifted approximately 0.07 mm {0.0028"} as shown in the
figure below in the paper feed direction.
In 4-divided energizing, the print position within the printable area of the thermal elements
for dots 1 to 96, 97 to 240, 241 to 368, and 369 to 512 is shifted approximately 0.04 mm
{0.0016"} as shown in the figure below in the paper feed direction.
To Next Page
Loading...
