Epson TM-T70-i Technical Reference Guide

Chapter 2 Setup
43
2
Selecting the Print Density (DIP Switch 2-3/2-4)
Function SW 2-3 SW2-4
Low power consumption mode ON ON
Print density (Standard) OFF OFF
Print density (Darker than standard) ON OFF
Print density (Dark) OFF ON
 If the print density is set to “Darker than standard” or “Dark” level, printing speed may be
reduced.
 The print density can be set with DIP switches (2-3/2-4) or the customized value. (See
"Setting the Memory Switches" on page 74.) The initial setting of the customized value is
“Depends on the DIP switch settings.” If the customized value is changed, the value set
with the customized value is enabled.

Epson TM-T70-i Specifications

General

Type	POS printer
Character size	1.69 x 3.38 mm
Print technology	Thermal
Wi-Fi	No
Ethernet LAN	Yes
Ethernet LAN data rates	10, 100 Mbit/s
USB connector	Micro-USB, USB Type-A
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Connectivity technology	Wired
Mean cycles between failures (MCBF)	52000000
Internal memory	256 MB
Autocutter durability	1.5 million cuts
Mean time between failures (MTBF)	360000 h
Voltage	24 V
Product color	Black

Weight and Dimensions

Depth	194 mm
Width	125 mm
Height	114 mm